Aluminum Foil Slitting Machine

This aluminum foil slitting machine is used for slitting and rewinding various large rolling materials such as paper, (10g/㎡-300g/㎡) cellophane paper, bill paper, OPP, PET, FILM, AL, Copper foil etc in narrow width.

Product Details

Features:

1. Aluminum Foil Slitting Machine uses automatic constant tension, central surface reeling.

2. Frequency converter timing for main machine, keeps high speed and stable operation.

3. It has the functions of automatic metering, automatic alarm etc.

4. Adopts A and B pneumatic shaft structure for rewinding, easy for loading and unloading.

5. Adopts photoelectric automatic error correction adjustment system for unwinding, narrow materials will be easy slitting

6. Equips with automatic waste film blowing device and circle blade system.

7. Automatic material inputting with pneumatic, is matched with inflatable


Technical Specifications:

image001


456



Explain in detail the development of the Aluminum Foil Slitting Machine

The mission power of the slitter is a comprehensive concept. In the slitting process, the stable tension system of the slitting machine is a main target to ensure product quality. The magnetic powder clutch and brake are a special active actuator. The slitting machine is filled into the mission gap or the film is cut into Moment, changing the excitation current can change the magnetic condition of the magnetic powder, and then adjust the transmitted torque.


It can be used for stepless speed regulation from zero initial to synchronous speed. It is suitable for high speed section fine adjustment and medium and small power speed regulation system. The slitting machine controls the tension between the unwinding, pulling, slitting, winding, etc., so that the slitting data is always in a fluctuating state during the slitting process.

Assuming that the tension control is stable, the slitting machine can prevent the original data from being deformed and drifted during the process of speeding up and slowing down the machine. The meeting will create the sum of the troubles of the next process and the tension of the reel.


Most of the previous slitting machines used magnetic powder clutch to control the tension, but the speed of the magnetic powder clutch can not be high. The slitting machine is easy to form a high-speed conflict of magnetic powder during operation. The slitting machine now mostly uses a sagittal variable frequency motor to control the cutting. The tension system of the machine is actively detected by the pendulum roller, and the human machine is used for low temperature. The slitting machine shortens its life, and it will be stuck when it is severe, which will hinder the operation of the machine.


Following the development of technology, servo drive skills, etc., it divides the raw materials into several independent units. The mission principle is to fix the raw materials on the discharge material. One end of the discharge shaft is equipped with a magnetic powder tension controller to stabilize the raw materials. The required tension is then pulled through a pair of rubber rollers to cut the raw materials, and the slitting machine is cut into several strips by the blade, and then guided by the guide rollers to the A and B winding reels to stop the winding products.


Inquiry

You Might Also Like