CE Approved Automatic Punching and Die Cutting Machine (RD-CQ-850)

CE Approved Automatic Punching and Die Cutting Machine (RD-CQ-850)

This automatic die cutting and creasing machine can efficiently complete the die cutting and embossing of products, as well as maintaining the highest precision and product quality. It is well equipped and almost can adapt to all die cutting requirements of products.

Product Details

In the process of adopting omni-channel thinking to provide consumers with high-value carton die cutting machine, hot laminating machine, center surface slitter rewinder and services, we will continuously improve the ecological chain of our business. Our company has advanced process equipment, reliable product quality, sound service network, and is strictly managed according to the international quality system. Our company turns the development momentum to rely on innovation-driven, vigorously promoting technological innovation, management innovation and business model innovation. We uphold the core values of harmony-based and pursuit of excellence, and insist on integrating and serving the national development strategy. We take 'based on the local, fly over China, want to net the world' as the market orientation and development goal.

Features:

1. Automatic Die Cutting and Creasing Machine high quality feeder is made in Taiwan with 4 suction nozzle for stack paper and 4 suction nozzle for delivering paper, ensures stable and fast paper feeding .

2. Pre-loading unit, non-stop feeding, with Max pile height to 1600mm.

3. The pre-loading unit is equipped with guiding rails, operator move the stack paper to feeder accurately and conveniently.

4. Side and front guiding have sensor which can adjust the sensitivity.

5. The anti-obstacle device prevent the machine damaged.

6. Paper feeding will be slow down when the paper reach the front guiding, achieves more accurate location

7. Japanese NITA convey belt , the speed can be adjusted .

8. Germany made stainless steel is used for convey board in order to achieve smooth and quick paper delivery .

9. Pneumatic cutting plate lift for easy slide in and out .


Technical Specifications:

image001



Technical Drawing:

image003

image005


image007




Automatic Die Cutting and Creasing MachineFine adjustment of mold flatness

When the tool pressure is adjusted until the mold has been able to fully die-cut the product, but there are still some subtle places that do not meet the punching requirements, this requires fine-tuning the mold flatness. Usually in the fine-tuning process, we need to use carbon paper, pad the carbon paper between the pad and the template, then die-cut, leave the carbon paper imprint on the pad, and then compare the die-cut sample with the imprint on the template. In the deep cut, we need to use a small blade to shave the template. When the punching is too shallow to effectively cut, we need to cover the tape or other materials in a shallow place, and the template can be effectively cut. In the process of fine-tuning the flatness, we must adjust it in the smallest unit whether we are shaving or covering. Our commonly used cushioning material is 0.025mm OPP, and other thinner materials can also be used.

After we have completed the above steps, we can carry out the first continuous die cutting of the product. However, in the process of continuous die cutting, we found that the product is not completely perpendicular to the direction of the feed, especially in the case of the set, there is an error in the matching lines of the front and the back. This is because when we adjust the mold, the die is not completely or relatively strictly perpendicular to the material direction. At this time we need to adjust the vertical angle of the tool. At present, most of the machines on the market already have mold angle adjustments that do not require re-specification of the knife on the die. It is only necessary to fine-tune the mold base on the device to adjust the angle of the mold.

Automatic Die Cutting and Creasing Machine

The bronzing film, also known as anodized aluminum (the name of electro-aluminized aluminum is used more in the printing industry), is a hot stamping material made by coating and vacuum-depositing a layer of metal foil on a film base. The thickness of the anodized aluminum is generally (12, 16, 18, 20) μm and 500 to 1500 mm wide. The electrochemical aluminum foil is formed by coating a release layer, a color layer, a vacuum aluminum plating and a coating layer on the film sheet, and finally rewinding the product. Domestically produced electrochemical aluminum foil is generally 4 to 5 layers.

We can find our internal control defects in time, improve the internal control system and improve the quality of our CE Approved Automatic Punching and Die Cutting Machine (RD-CQ-850). In order to further consolidate the foundation of enterprise development and expand the development space of enterprise, our company will focus on the optimization of enterprise structure and promote the sustainable and stable development of the enterprise. Please be assured that we are not only a long-term partner of your friends, but also your trusted friend forever!
Hot Tags: automatic die cutting and creasing machine, China, manufacturers, suppliers, factory, Folio Size Sheeter, paper roll slitting & rewinding machine, Folio Sheeter, automatic foil stamping machine, stamp embossing machine, die cutting machine with breaker

Inquiry

You Might Also Like