1. Plastic Film Slitter Rewinder imported PLC integrated control is used in electrical control system, human-machine communication is carried out by touch screen. Set and display working parameters according to requirements from different products
2. Vector frequency-inverter is adopted for rewinding, material roll diameter is automatically calculate by PLC to achieve automatic tension control
3. Vector frequency-inverter is adopted for unwinding, motor active unwinding, material roll diameter is automatically calculated by PLC to achieve automatic tension control
4. The independent unwind part use shaftless pneumatic insert system, convenience for loading and unloading the jumbo roll. Unwind with automatic web guide
5. Special slip pneumatic shaft for rewind, doctor knife and round blade changing system for slitting. This makes the rewind rolls surface even and nice tension.
6. Rewind and unwind part can running two direction, go forward and back
7. PLC calculates the counting meter, roll diameter. Machine will stop when lack of material
8. This machine has perfect design and good safety protection
9. There are many different models such as 1300,1500,1700mm available slitter rewinder.
Everyone should know that the WENZHOU KEEPON plastic film slitter rewinder is used to cut all kinds of tapes, especially for cutting high-precision electronic adhesive materials. Such as double-sided tape, masking tape, cloth tape, PVC tape, PET tape, foam tape, 3M tape series, polyester film tape, gold finger, PE protective film, aluminum foil, copper foil, non-woven fabric, release Paper, etc.
Process requirements for slitting machine:
1. Plastic Film Slitter Rewinder should stop the whole length or the whole original data from cutting and cutting. For example, plastic packaging materials, packaging cartons, steel plates, film, leather, wood chips, etc. should be cut and cut, and fixed length cutting should be used. control.
2. The control of the fixed length slitter is divided into static and dynamic slitting: precise stop when the set length arrives, then static slitting processing, restart after the slitting; when the set length arrives, no The cutting signal is sent out at the stop, and the slitting machine dynamically cuts the machining during the data movement.
3. The most important performance index of the fixed length slitting machine is the cutting precision and the divergence of the waste length.
4. The length of the slitting machine can be set continuously. If there is an error in the length of the slitting, it is easy to stop the calibration by setting the parameters.