This Paper Roll Sheeter Machine is fit for jumbo roll paper sheet into required size, with advanced technology from Europe, it has features of high speed, flexible unwinding unit, high production capacity and reliable working.
1. Rack and transmission system: The frame consists of left and right wall panels and supporting and discharging machinery. The transmission system is mainly used to pull raw materials and wind the finished product. It is powered by the variable frequency stepless speed regulating motor. The belt makes the traction rubber roller run, and the main traction rubber roller and the driven traction rubber roller are closely attached and synchronously run to pull the raw material to walk, and the active traction roller drives the lower circular cutter shaft to synchronously operate to achieve better cutting requirements, and passes through the lower circle. The cutter shaft drives the winding A and the winding B to perform synchronous operation, thereby achieving the purpose of receiving the material.
2. Receiving mechanism and tension device: The receiving mechanism mainly consists of a chain, a synchronous wheel, a magnetic powder clutch, and an air-expansion shaft. The two reels are controlled by a single motor. As long as the current of the magnetic clutch is adjusted, you can change the tension of the receiving shaft.
3. Traction members: The traction members mainly consist of a pair of traction rubber rollers and a number of hard oxidized aluminum rollers, which are used to take the raw materials for the winding of the finished product. The power is derived from the motor passing through the V-belt to the initiative. Pull the rubber roller to make it run.
4. Cutting knife holder: The cutting knife holder has a circular knife slitting, a straight knife slitting, and a moving handle. The plane cam can make the circular knife make a slight axial movement to adjust the cutting of the round knife edge and the cushion sleeve groove. gap.
5. Waste rewinding and discharge: The waste is discharged through the wind pipe using the wind of the blower.
6. Discharge mechanism and automatic rectification: The discharge mechanism mainly consists of a discharge shaft, a support block, a cylinder, a base, a left and right moving seat, etc., which are composed of an automatic correcting device: a photoelectric opening, a correcting guide roller, a left and right bracket, a correcting moving plate, and a ball. Nut and screw, synchronous motor and left and right limit switches.