Details Of Primary Maintenance Of Slitter

- Jun 24, 2019-

Daily maintenance of slitter (daily hygiene)

A. Keep the machine surface, guide rollers and rubber rollers clean.

B. Clean the machine stage by stage with an air gun.

C. To prevent scratch of rubber roll by waste edge and blade when cutting.

D. Clean up the scrap in the edger in time.

E. Choose good paper core, not rough loading and unloading reel.

F. The slitter is refueled according to the requirements of the mechanical lubrication drawing.


Monthly maintenance of Slitter

A. Clean air filter.

B. Clean the whole machine thoroughly.

C. Lubricate the parts according to the lubrication diagram. D. Inspect the rotation firmness of each machine, and strengthen the loosened parts.

E. Check the tension and life of each belt.

F. Clean up the dust on the cooling fan of the electric control box.

G. Cleaning the filter screen of the waste edge blower.


First-level maintenance of Slitter

A. Clean up the whole machine and the guide rollers and rubber rollers.

B. Check the tension and life of all drive belts and adjust or replace them.

C. Add lubricating oil and grease to each transmission part.

D. Cleaning water filter and refueling oil mist.


Secondary Maintenance of Slitter

A. Clean up the whole machine and the guide rollers and rubber rollers.

B. Check the firmness of each mechanical transmission, where it is loosened, and make it firm.

C. Check the tension and life of all transmission belts, adjust and replace them.

D, EPC unit refueling or oil exchange.

E. Add lubricating oil and grease to each transmission part.

F. Clean up the water filter, oil mist and refuel the oil mist.

G. Check the electrical system of the slitter and clean the electrical box and motor.