What are the operating steps used by the slitter?
The operating speed of the slitting machine can reach more than 300 meters per minute. Before we use the equipment, we must carefully check the machine to see if the parts are damaged. So everyone knows that when we use the slitting machine, everyone knows what the operating steps of the slitting machine are?
1. When using the slitter, when turning on the power, first check whether the static elimination mode has been turned on. This is to prevent the machine from malfunctioning and causing unnecessary losses during operation.
2. Turn on the air pressure switch of the slitter and adjust it to between 0.5 and 0.6.
3. After the mother roll of the slitter is placed in the roll section, the machine should be debugged, the diameter of the mother roller should be compared, press the up or down button, adjust the unwinding rack to the appropriate height, and then clamp Roll the film so that it can rotate at a constant speed or quickly, and press the height adjustment button again to confirm the safety.
4. The slitter then installs the blade. First, check the blade edge of the blade to see if there is any damage, and adjust the placement of the blade.
5. The slitter adjusts the paper core so that the paper can be placed in the correct position, so that the cut paper will be very uniform.