What are the maintenance measures for the slitter?

- Jul 15, 2020-

What are the maintenance measures for the slitter?


During the use of the slitter, the slitter should be maintained and maintained. When the slitter is in operation, the vibration time is too long, and various parts may be loose. What are the maintenance measures of the slitter?

 

1. The transmission device of the slitting machine, such as the gear chain, needs to be added with butter after a period of time.

 

2. Generally, there is no problem with the slitting machine. The consumable parts are nothing more than small gears. If one is added, the printing knife is easy to break. The wool roller will become thin after one and a half years of use. It needs to be returned to the factory for repair. If the embossing pattern needs to be replaced in the steel roller embossing device of the slitting machine, the steel roller needs to be shipped back to the original factory for modification, and it does not cost much.

 

3. Pay attention to the stable voltage, otherwise it is easy to burn the motor; pay attention to hygiene, the cutting machine should not allow debris to fall between the steel roller and the hair roller.

 

The main cutter shaft is installed on the upper end of the slitter, and a number of blades are arranged on it, and arranged according to a certain gap; the support frame of the main cutter shaft is also provided on the top of the slitter, and a support is installed in the middle of the support frame cylinder.