Some Suggestions on the Use of Automatic Slitter

- Jul 05, 2019-

Automatic slitting machine is a kind of mechanical equipment which cuts wide paper or film into many narrow materials. It is often used in paper-making machinery and printing and packaging machinery. It has the advantages of smooth operation, easy operation, strong adaptability and high output.


Before the automatic Slitter is put into operation, we should first check whether the working positions are properly adjusted and the parts that need lubrication should be filled with lubricating grease in advance to check whether the cutter is sharp. Before the equipment is ready for operation, all personnel must notify the departure of the equipment to ensure personal safety before starting operation; do not touch the membrane roll or roll core in operation by hand, so as not to involve the hand in causing personal injury; do not scratch or cut the roll core with knife or hard object.


When we use the automatic slitter, we should pay attention to ensure the correct and stable voltage, current and hydraulic equivalents before starting the machine. When everything is normal, the car will run empty first, check if there is any abnormality, and input the order to be processed into the computer to arrange the order for inspection in advance. After the equipment is put into operation, the best working state of the equipment should be adjusted in time according to the production situation to ensure that the indentation of the slitting machine is moderate, the slitting without burrs, and the trimming position on both sides is appropriate. To ensure smooth feed and discharge of paper and accurate cutting length, it is also necessary to monitor the operation of vertical and horizontal cutting machines which are connected with production management, and to guard against paper blockage and bad products.