How to operate the slitting machine?
The operating speed of the slitting machine can reach more than 300 meters per minute. Before using the equipment, we must carefully check the machine to see if the parts are damaged. So everyone knows how to operate the cutting machine?
1. When turning on the power, first check whether the static elimination mode has been turned on. This is to prevent the machine from malfunctioning and causing unnecessary losses during operation.
2. Turn on the air pressure switch of the slitter and adjust it to between 0.5 and 0.6. The adjustment of air pressure is very critical, because it will affect the stability of operation. After adjustment, use three to six cones to place the mother roll in the roll section.
3. After the mother roll is placed in the roll section, the machine should be debugged, the diameter of the mother roll should be compared, press the up or down button, adjust the unwinding rack to the appropriate height, and then clamp the roll film. So that it can rotate uniformly or quickly,
4. Press the height adjustment button to confirm the safety. Then to install the blade, first check the blade edge of the blade to see if there is any damage, and then select the appropriate cutting method according to the needs.