Common Problems and Solutions of Slitter

- Jul 09, 2019-

Slitter is an important equipment in paper processing industry. Paper manufacturers use this equipment almost every day. If there is a breakdown, it will hinder the production process, and the manufacturers will lose some. Generally speaking, if the normal staff do not pay attention to the daily maintenance, the slitter will often appear some difficult problems. In order to solve these small problems from time to time, we summarize the following common problems for your reference, hoping to help you:

First, the paper cutter does not roll evenly. This situation is mostly due to the inapplicability of paper cores. As long as the paper cores with the required inner diameter are replaced, and the winding roller is used in the winding process, the winding irregularity of the slitter can also be avoided.


Second, the trend of slitting and winding materials. This is mainly due to the incorrect winding tension, adjusting the appropriate winding tension of paper slitter, winding roll is used and slitting material is wrapped in overpressure roll before entering the winding paper core.


Third, the meter count is not accurate. This kind of problem can make the meter wheel contact the feeding rubber roller at the same time, and make a mark on the meter wheel and hand-shake 5 times to count 1 meter or replace the meter.


These are the common problems that staff often encounter in the operation of slitter. In order to solve these problems quickly, they should be kept in mind. There may be other new problems. Whether it is a rewinder or a napkin paper machine, you can consult the manufacturer of these paper machinery and ask professional technicians to help solve them.