1. Fully Automatic Die Cutting Machine has high quality feeder made in Taiwan with 4 suction nozzle for stack paper and 4 suction nozzle for delivering paper , ensures stable and fast paper feeding.
2. Pre-loading unit, non-stop feeding, with Max pile height to 1600mm.
3. The pre-loading unit is equipped with guiding rails, operator move the stack paper to feeder accurately and conveniently.
4. Side and front guiding have sensor which can adjust the sensitivity.
5. The anti-obstacle device prevent the machine damaged.
6. Paper feeding will be slow down when the paper reach the front guiding , achieve more accurate location.
7. Japanese NITA convey belt , the speed can be adjusted.
8. Germany made stainless steel is used for convey board in order to achieve smooth and quick paper delivery.
9. Pneumatic cutting plate lift for easy slide in and out.
10. Easy way to turn over and change die cutting chase and plate with short time.
11. High quality gripper bars made in Japan with long life time.
12. High quality U.K imported chain ensure stability and accuracy in long time running.
13. Automatic lubrication and cooling system for main drive and automatic lubrication for main chain.
14. Overload protection device with torque limiter in index box for the highest safety of operator and equipment.
15. Crank shafts and worm rod is made of 40 Cr with heating handling. Turbine is made of copper.
16. High quality imported air clutch.
17. SMC pneumatic components.
18. The upper, middle and lower stripping frames are controlled by 3 GPRS of cam wheels respectively.
19. Match with the center-line registration system in die cutting unit , the same system also apply to the stripping station to minimize changeover time , Accurate positioning can increase production efficiency.
1. Adhesive products: for all kinds of electronics: electrical special rubber pads, silicone stickers, velcro stickers, conductive adhesives, strong double-sided tape, 3M, Sony special stickers, backlight screens, etc., IT industry membrane switch, automobile manufacturing Adhesive products used in the industry.
2, dustproof materials: cotton pad, camera cotton, high density sponge, filter cotton, dust net, non-woven fabric.
3, anti-shock products: pull back rubber pad, rubber, transparent foot pad, PORON pad, 3M, flame retardant EVA, high foaming.
4, insulation materials: fire fast paper, aluminum foil, copper foil, PVC, PET, kraft paper, sponge jacket, pearl jacket.
5, EMI shielding materials: copper foil, aluminum foil, conductive cloth, absorbing materials.
6, heat-resistant insulation materials: enamel film, transparent mica film, fiber cloth, insulation cotton (cloth).
7, paper packaging materials: corrugated paper, wrapping paper and cardboard.
The die-cutting machine is mainly used for die-cutting, indentation and cold-pressing of trademarks, cartons, greeting cards, etc. in the paper packaging and decoration industry, and is an important equipment for post-press packaging processing.
Types of die-cutting machines Die-cutting machines are mainly divided into three types: round pressing, round pressing and flat pressing. According to the form of the template placement, it can be divided into vertical and horizontal. Manual (semi-automatic) and automatic according to the degree of automation. In terms of function, in addition to die-cutting, there is a hot stamping function, which is called a hot stamping die-cutting machine, and some have an automatic stripping function, which is called a stripping die-cutting machine. The circular die-cutting machine features wire contact, low die-cutting pressure and high production efficiency. It can be connected with offset printing machines, flexo presses, gravure presses and other printing equipment for in-line die-cutting, so the application range is wide. .