1. Automatic Hot Foil Stamping Machine has high quality feeder made in Taiwan with 4 suction nozzle for stack paper and 4 suction nozzle for delivering paper , ensures stable and fast paper feeding .
2. Pre-loading unit, non-stop feeding , with Max pile height to 1600mm.
3. The pre-loading unit is equipped with guiding rails, operator move the stack paper to feeder accurately and conveniently.
4. Side and front guiding have sensor which can adjust the sensitivity.
5. The anti-obstacle device prevent the machine damaged.
6. Paper feeding will be slow down when the paper reach the front guiding, achieve more accurate location.
7. Japanese NITA convey belt, the speed can be adjusted.
8. Germany made stainless steel is used for convey board in order to achieve smooth and quick paper delivery.
9. Pneumatic cutting plate lift for easy slide in and out.
10. Easy way to turn over and change die cutting chase and plate with short time.
11. High quality gripper bars made in Japan with long life time.
12. High quality U.K imported chain ensure stability and accuracy in long time running.
13. Automatic lubrication and cooling system for main drive and automatic lubrication for main chain.
14. Overload protection device with torque limiter in index box for the highest safety of operator and equipment.
15. Crank shafts and worm rod is made of 40 Cr with heating handling. Turbine is made of copper.
16. High quality imported air clutch.
17. SMC pneumatic components.
18. The upper, middle and lower stripping frames are controlled by 3 GPRS of cam wheels respectively.
19. Match with the center-line registration system in die cutting unit, the same system also apply to the stripping station to minimize changeover time , Accurate positioning can increase production efficiency.
The waste disposal machine is a pneumatic tool used for the waste edge removal of cardboard, fine corrugated and ordinary corrugated paper in the printing industry. It can replace the manual hammer to eliminate waste, improve work efficiency and shorten the waste elimination cycle.
Function: The pneumatic stripping machine drives the toothed chain to run at high speed through the air motor, and uses the sharp teeth to remove the waste paper edge.
The waste disposal machine is suitable for the waste edge removal of cardboard, fine corrugated and ordinary corrugated paper in the printing industry.
1. This machine is suitable for the waste edge removal of cardboard, fine corrugated and ordinary corrugated paper in the printing industry.
2, compact structure, lightweight and portable design, very convenient to use, male and female employees can be operated through simple training.
3, easy and fast waste, high efficiency, at least nearly 10 times higher than the traditional manpower cleaning efficiency, greatly shortening the delivery cycle, reducing the space occupied by semi-finished products, compared with the hammer knocking method, the scrap rate is large Amplitude reduces costs.
4, do not damage the bonding site when cleaning, improve the efficiency of the subsequent process
5, the power source uses a pneumatic motor, and the safety is good. The toothed chain is made of high-strength alloy steel through heat treatment process, which has extremely high hardness, strong wear resistance, long service life and convenient replacement.
6. Applicable paper range: 200g/m2-500g/m2 cardboard, single/double pit paper, pit paper with double pits.