Automatic Die Cutting Machine with Stripping

This automatic die cutting machine with stripping can efficiently complete the die cutting and embossing of products,as well as maintaining the highest precision and product quality. It is well equipped and almost can adapt to all die cutting requirements of products.

Product Details


1. Automatic Die Cutting Machine with Stripping has high quality feeder made in Taiwan with 4 suction nozzle for stack paper and 4 suction nozzle for delivering paper , ensures stable and fast paper feeding.

2. Pre-loading unit, non-stop feeding, with Max pile height to 1600mm.

3. The pre-loading unit is equipped with guiding rails, operator move the stack paper to feeder accurately and conveniently.

4. Side and front guiding have sensor which can adjust the sensitivity.

5. The anti-obstacle device prevent the machine damaged.

6. Paper feeding will be slow down when the paper reach the front guiding , achieve more accurate location.

7. Japanese NITA convey belt , the speed can be adjusted.

8. Germany made stainless steel is used for convey board in order to achieve smooth and quick paper delivery.

9. Pneumatic cutting plate lift for easy slide in and out.

10. Easy way to turn over and change die cutting chase and plate with short time.

11. High quality gripper bars made in Japan with long life time.

12. High quality U.K imported chain ensure stability and accuracy in long time running.

13. Automatic lubrication and cooling system for main drive and automatic lubrication for main chain.

14. Overload protection device with torque limiter in index box for the highest safety of operator and equipment.

15. Crank shafts and worm rod is made of 40 Cr with heating handling. Turbine is made of copper.

16. High quality imported air clutch.

17. SMC pneumatic components.

18. The upper, middle and lower stripping frames are controlled by 3 GPRS of cam wheels respectively.

19. Match with the center-line registration system in die cutting unit , the same system also apply to the stripping station to minimize changeover time , Accurate positioning can increase production efficiency.

Technical Specifications:


Technical Drawing:

Maintenance points of the Automatic die cutting machine with stripping

With the improvement of the quality of paper printing and packaging products, the automatic flat die cutting machine has been widely used in the paper packaging and printing industry. However, due to the lack of maintenance knowledge of the operator, the machine has more faults, which directly affects the normal operation of the production, resulting in an increase in production costs. It has disrupted the production arrangement plan and has a great impact on the delivery date. In order to further improve the operation process of the automatic flat die cutting machine, carry forward the new technology of the die-cutting machine and improve the modern operation level, the small series summarizes some maintenance points and maintenance knowledge of the automatic flat die-cutting machine. For peer exchange and sharing.

First of all, the operator should pay attention to dust and clean. In actual production, a large amount of waste paper edge and paper hair will be produced when die-cutting the carton. If you pay attention, you will enter the chain transmission part, the die-cutting part moving platform and some rotating motion parts, and may block the photoelectric detection head, etc. , causing a malfunction. Therefore, it is necessary to put the cleaning work of the die-cutting machine in the first place, and then ensure that the machine runs without trouble.

Second, the oil change of the die-cutting machine. The main action of the die-cutting machine is that the main motor drives the sliding rods and pulleys, and then drives the four pairs of toggles to move. It can reach 6000 sheets per hour in high-speed work. It is very troublesome without good lubrication and cooling. Lubrication maintenance is divided into daily insurance, weekly insurance and monthly insurance, as follows:

Daily lubrication

1. Add oil lubrication to the side gauges, gears, cam stroke bearings, press rods, feeder head cams and directional joints.

2. The main chain is lubricated, and the automatic lubrication device maintains the oil level and oil number.

Weekly lubrication

1. The front gauge adjustment device adds oil and butter.

2. Front gauge, cam plus oil, gauge drive chain plus chain oil, spring plus butter.

3. Feida's lifting cam adds oil, spring and butter.

4. Feida transmission chain plus chain oil.

5. Apply the oil to the upper plate tightening device.

6. Add tooth oil to the teeth.

7. Feeding cam group with butter

Hot Tags: automatic die cutting machine with stripping, China, manufacturers, suppliers, factory, slitter and rewinder machine, fully automatic cutting machine, label slitting machine, Paper Corrugation Machine, paper roll rewinding machine, Paper Sheeter For Sale


You Might Also Like